標識設計與標識制作的差距變化。

    標識設計就是針對企業的另一采購的軟裝系統，作為設計公司，不能光是設計這類產品，還是需要制作出來的，這樣的設計才是有用的設計。對于很多的設計公司，很多設計師都是只管設計而不會考慮制作出來的實際運用的情況，作為一名設計師，應該把設計立足于實際的操作性，設計主要就是實用排第一位，再就是設計的創意方面。

    一個好的設計即好好地應用，也有更新其的設計在我們日常生活中，合理的應用設計也是其中指的設計，不要光看表面功夫，有些內在的設計才是有一定的創意的，設計生活，設計人生的每一項事務，把實際相結合的設計才是好的設計。

    在標識牌設計上，這個最注重的就是制作的問題，不要把沒有用的設計給客戶看，到時制作不出來，那就等到于白設計了。一定要考慮這些問題，通常就會有好多的設計公司設計的標識牌，到了制作廠家那一塊又會重新調整，重新整理深化設計，為什么有這么個行業呢，那就是因為設計與制作脫節才會產生這樣的情況了。

Identify the gap between design and production of logo changes.

     Logo design is for the purchase of another company's software installation system, as a design company, not just the design of such products, or need to make out, this design is useful for design. For many design companies, many designers are not just designed and produced to consider the practical application of the case, as a designer, the design should be based on actual operational, functional design that is ranked first in the main, Then there are the creative aspects of design.

     A good design that is properly applied, but also to update their designs in our daily life, a reasonable application design is the design which means, do not just look at the superficial, there is a certain inherent design of innovative, design life the design life of each transaction, the actual design is a combination of good design.

     In signage design, making this the most attention is the problem, not to not use the design to the customer, when the production does not come out, then wait for the white design. Be sure to consider these issues, which usually have a lot of design companies design signage, to make that a manufacturer will re-adjust, re-organize to deepen design, why is there such a trade it, that is out of line because the design and production will have such a situation.